/testing/guestbin/swan-prep
east #
ipsec setup start
[ 00.00] registered KLIPS /proc/sys/net
[ 00.00] ipsec_3des_init(alg_type=15 alg_id=3 name=3des): ret=0
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=12 name=cbc(aes) keyminbits=128 keymaxbits=256, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=253 name=cbc(twofish) keyminbits=128 keymaxbits=256, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=252 name=cbc(serpent) keyminbits=128 keymaxbits=256, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=6 name=cbc(cast5) keyminbits=128 keymaxbits=128, found(0)
[ 00.00] KLIPS cryptoapi interface: alg_type=15 alg_id=3 name=cbc(des3_ede) keyminbits=192 keymaxbits=192, found(0)
[ 00.00] KLIPS: lookup for ciphername=cipher_null: not found
[ 00.00]
Redirecting to: systemctl start ipsec.service
[ 00.00]
east #
/testing/pluto/bin/wait-until-pluto-started
east #
ipsec auto --add any--east-l2tp
002 added connection description "any--east-l2tp"
east #
ipsec auto --add north--east-pass
002 added connection description "north--east-pass"
east #
ipsec auto --route north--east-pass
east #
# make sure that clear text does not get through
east #
iptables -A INPUT -i eth1 -d 192.1.2.23 -p udp --dport 1701 -j REJECT
east #
iptables -A OUTPUT -o eth1 -s 192.1.2.23 -p udp --sport 1701 -j REJECT
east #
(cd /tmp && xl2tpd -D 2>/tmp/xl2tpd.log ) &
[1] XXXX
east #
echo done
done
east #
ipsec look
east NOW
192.1.2.23/32 -> 192.1.3.33/32 => %pass
192.1.2.23/32:1701 -> 192.1.3.33/32:1701 => esp0xESPSPI@192.1.3.33:17
ipsec0->eth1 mtu=16260(9999)->1500
esp0xSPISPI@192.1.2.23 ESP_AES_HMAC_SHA1: dir=in src=192.1.3.33 iv_bits=128bits iv=0xIVISFORRANDOM000IVISFORRANDOM000 ooowin=64 alen=160 aklen=160 eklen=128 jiffies=0123456789 natencap=none natsport=0 natdport=0 refhim=1
ROUTING TABLES
default via 192.1.2.254 dev eth1
169.254.0.0/16 dev eth0 scope link metric 1002
169.254.0.0/16 dev eth1 scope link metric 1003
169.254.0.0/16 dev eth2 scope link metric 1004
192.0.1.0/24 via 192.1.2.45 dev eth1
192.0.2.0/24 dev eth0 proto kernel scope link src 192.0.2.254
192.0.2.128 dev ppp0 proto kernel scope link src 192.0.2.254
192.1.2.0/24 dev eth1 proto kernel scope link src 192.1.2.23
192.1.3.33 dev ipsec0 scope link
192.9.2.0/24 dev eth2 proto kernel scope link src 192.9.2.23
NSS_CERTIFICATES
Certificate Nickname Trust Attributes
SSL,S/MIME,JAR/XPI
east #
east #
grep 'Result using RFC 3947' /tmp/pluto.log
"any--east-l2tp"[1] 192.1.3.33 #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal) sender port 500: no NAT detected
east #
if [ -n "`ls /tmp/core* 2>/dev/null`" ]; then echo CORE FOUND; mv /tmp/core* OUTPUT/; fi
east #
if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi